|
On this page you can post your question and after review it may be approved and a response may be written by the Lamkin Expert.
The following questions have been asked and answered:
|
|
Asked by Bob Richards on February 21, 2010 at 10:28 pm
Q: Do you make ribbed grips.If you dont why not.
A: Yes. We offer ribbed in both the Crossline and Performance Plus families. In the Performance Plus we also offer a ribbed cord model.
Lamkin Sales
Asked by Mike on February 21, 2010 at 12:29 pm
Q: I have used your Crossline Cord grips for a few years now how does your Performance Plus cord compare to the Crossline Cord does it have a softer feel
A: The Performance Plus Cord feels different than the Crossline Cord for a couple of reasons.
1. The Performance Plus has less pattern than the Crossline. The Crossline's pattern coupled with the Cord makes for a very aggressive cord. The Performance Plus grip has a less aggressive pattern so the cord is softer feeling.
2. The Black Cord used in the Performance Plus is a softer, thinner gauge cord than that used in the Crossline Cord.
The Lamkin Tech Team
Asked by Vance McCollough on February 20, 2010 at 9:20 pm
Q: In one answer in the Q&A's you state that the midsize performance plus grip is +1/32" and in another answer you state it is +1/16". 1) Which is correct for the performance plus midsize? Also how much larger is the midsize performance plus 3GEN
Thanks
A:
Asked by Mike on February 18, 2010 at 3:04 pm
Q: Will you be making other colors available in the N-Dur and 3Gen grips
such as a plain black
A: Right now the color options available are what we plan to market in 2010. However, we feel the 3GEN material is something that is here to stay for Lamkin and it can be manufactured in any color so it is very possible that line extension will include a "toned down" version of the N-DUR or Performance Plus 3GEN grip.
The Lamkin Tech Team
Asked by jr on February 17, 2010 at 7:08 pm
Q: your midesize 3gen is + 1/32 what size will it be on a .60 shaft + 3/64 or +1/16
A: The result will be a grip that is 3/64" oversize.
Asked by paul on February 15, 2010 at 6:46 am
Q: where can i get the n-dur grips in the uk?
A: Please go to the "Find a Retailer" page on the Lamkin website. There you will see a link to the International Distributor page which has the contact info for our distributor in the UK. Our distributor can then direct you to retailers in the UK that have the N-DUR model.
Kindest regards,
Lamkin Sales
Asked by john on February 8, 2010 at 10:30 pm
Q: how much will the grip size increase if I put two wraps on the new n-dur grips?
A: By two wraps, I assume you are meaning, one wrap than one extra. If you add two wraps to the N-DUR, you are adding roughly 1/32" to the OD of the grip.
Kindest regards,
The Lamkin Tech Team
Asked by David on February 6, 2010 at 6:02 pm
Q: I have the Michelin Performance OCS Tour .600 round grips on Callaway's Uniflex shafts. Will this same grip in the .580 round fit the Callaway shafts?
A:
Asked by Jim on February 3, 2010 at 1:13 pm
Q: Is the a problem using a .580 grip on a .600 shaft?
A: No. Actually, at Lamkin, we design our grips to have a .580 core to be installed on a .600 shaft. .600 shaft diameters are the most common and with our smaller core, we design interference into the core so that when installed the grip expands to the correct desired outer diameter.
Kindest regards,
The Lamkin Tech Team
Asked by Brandon H on February 3, 2010 at 6:51 am
Q: I am interested in your N-DUR grips however with the size of my hands I am looking for a midsize, any chance you will be adding a midsize option to the N-DUR series and if so can you approximate a time? Thanks.
A: It is very likely that we will expand the N-DUR product line for 2011 (launching Fall of 2010) with Midsize and Men's undersize options.
The Lamkin Tech Team
Ask your Question:
|
